PDS Sika® ViscoCrete® GL 3177
PDS Sika® ViscoCrete® GL 3177
Product Data Sheet (PDS)
Sika® ViscoCrete® GL 3177 is an innovative latest generation superplasticizer based on polycarboxylic ether (PCE) polymers and is specially engineered for readymix concrete and precast concrete. Sika® ViscoCrete® GL 3177 is differentiated from conventional superplasticisers, such as those based on sulphonated melamine and naphthalene formaldehyde condesates in that it is based on a unique carboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process the same electrostatic dispersion occurs but the presence of the lateral chains, linked to the polymer backbone, generate a steric hindrance which stabilises the cement particles capacity to separate and disperse. Suitable for use in hot and tropical climatic conditions.
PDF - 1 MB (en)

Contact us if document is not available

Show all documents

Sika® ViscoCrete® GL 3177

(former MGlenium 3177)

POLYCARBOXYLIC ETHER BASED SUPERPLASTICIZER FOR THE PRODUCTION OF HIGH QUALITY
READY MIX AND PRECAST CONCRETE

Sika® ViscoCrete® GL 3177 is an innovative latest generation superplasticizer based on polycarboxylic ether (PCE) polymers and is specially engineered for readymix concrete and precast concrete. Sika® ViscoCrete® GL 3177 is differentiated from conventional superplasticisers, such as those based on sulphonated melamine and naphthalene formaldehyde condesates in that it is based on a unique carboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process the same electrostatic dispersion occurs but the presence of the lateral chains, linked to the polymer backbone, generate a steric hindrance which stabilises the cement particles capacity to separate and disperse.  Suitable for use in hot and tropical climatic conditions.

Sika® ViscoCrete® GL 3177 offers the following benefits for: The ready-mix producer:
  • Capability of delivering high performance concrete
  • Production of a concrete with low water cement ratio without loss of workability
  • Single product for many application requirements

The contractor / applicator:
  • Easier placing and faster strength development
  • Improved concrete surface appearance

For the Engineer:
  • Predictable performance
  • Improves quality and durability of concrete
Inquire Now
PDS Sika® ViscoCrete® GL 3177
PDS Sika® ViscoCrete® GL 3177
Product Data Sheet (PDS)
Sika® ViscoCrete® GL 3177 is an innovative latest generation superplasticizer based on polycarboxylic ether (PCE) polymers and is specially engineered for readymix concrete and precast concrete. Sika® ViscoCrete® GL 3177 is differentiated from conventional superplasticisers, such as those based on sulphonated melamine and naphthalene formaldehyde condesates in that it is based on a unique carboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process the same electrostatic dispersion occurs but the presence of the lateral chains, linked to the polymer backbone, generate a steric hindrance which stabilises the cement particles capacity to separate and disperse. Suitable for use in hot and tropical climatic conditions.
PDF - 1 MB (en)

Contact us if document is not available

Show all documents

Usage

Sika® ViscoCrete® GL 3177 is used for the production of high quality early setting ready-mix concrete and in Precast industry.  

Advantages

Sika® ViscoCrete® GL 3177 offers the following benefits for: The ready-mix producer:
  • Capability of delivering high performance concrete
  • Production of a concrete with low water cement ratio without loss of workability
  • Single product for many application requirements

The contractor / applicator:
  • Easier placing and faster strength development
  • Improved concrete surface appearance

For the Engineer:
  • Predictable performance
  • Improves quality and durability of concrete

Packaging

210 L drum, 1000 L flowbin or bulk supply in tanker

Colour

Brown colored liquid

Product Details

Sustainability / Certifications / Approvals

CERTIFICATES AND TEST REPORTS

Sika® ViscoCrete® GL 3177 follows the requirements of ASTM C494; Type F & G and BS EN 934-2
Product Information

Composition

Aqueous solution of modified polycarboxylates, co-polymers

Shelf life

12 months from date of production if stored properly

Storage conditions

Store in undamaged, unopened, original sealed packaging in dry conditions at temperatures between +5 °C and +45 °C. Protect from direct sunlight. Mix well before use.

 

Density

~1.04 kg/l (+25 °C)

pH-Value

5–8

Total chloride ion content

Nil

(BS EN 934-2)
Technical Information

Concreting guidance

The standard rules of good concreting practice for production and placing must be observed when using Sika® ViscoCrete® GL 3177 in concrete. Refer to relevant standards. Fresh concrete must be cured properly especially at high temperatures in order to prevent plastic and drying shrinkage. Use Sika® Antisol® products as a curing agent or apply wet hessian.

Application

Application Information

Compatibility

Sika® ViscoCrete® GL 3177 is suitable for mixes containing all types of cement and supplementary cementitious materials such as: Microsilica (Silica Fume), Fly Ash (PFA), GGBS (Ground Granulated Blast Furnace Slag) and the following Sika products:
▪ SikaPump®
▪ Sika® FerroGard®
▪ SikaFume®
▪ SikaFiber®
▪ Sika® Aer
▪ Sika® Stabilizer
▪ SikaControl®

Sika® ViscoCrete® GL 3177 can be used with air-entraining admixtures, provided they meet ASTM, AASHTO CRG specifications.

We recommend to perform trial mixes to establish the required performance when combining Sika® ViscoCrete® GL 3177 with the above products or other admixtures. Please consult our Sika Technical Department for further assistance.

Dispensing

Sika® ViscoCrete® GL 3177 is a ready-to-use admixture to be added to the concrete as a separate component. Optimal result is obtained if Sika® ViscoCrete® GL 3177 is poured into the concrete mix right after the addition of the first 80 % of the mixing water, i.e. when all solids are wetted. Avoid adding the admixture to the dry aggregates.
Consumption

Recommended dosage

0.4 to 2.5 L per 100 kg of total binder. Trial mixes must be performed to establish the exact dosage as per the project requirement.

Documents