PDS SikaPlast® PH 3107
PDS SikaPlast® PH 3107
Product Data Sheet (PDS)
SikaPlast® PH 3107 is an innovative latest generation mid range Superplasticizer based on polycarboxylic ether (PCE) polymers and is specially engineered for precast and ready mix concrete. SikaPlast® PH 3107 is differentiated from conventional superplasticizer, such as those based on sulphonated naphthalene formaldehyde condensate. SikaPlast® PH 3107 is based on a unique carboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process the same electrostatic dispersion occurs but the presence of the lateral chains linked to the polymer backbone, generate a steric hindrance which stabilizes the cement particles capacity to separate and disperse. This mechanism provides flowable concrete with greatly reduced water demand. SikaPlast® PH 3107 is suitable for use in hot and tropical climatic conditions.
PDF - 1 MB (en)

Contact us if document is not available

Show all documents

SikaPlast® PH 3107

(former MPolyheed 3107)

Polycarboxylic ether based mid range superplasticizer for the production of high quality precast and ready mix concrete 

SikaPlast® PH 3107 is an innovative latest generation mid range Superplasticizer based on polycarboxylic ether (PCE) polymers and is specially engineered for precast and ready mix concrete.  SikaPlast® PH 3107 is differentiated from conventional superplasticizer, such as those based on sulphonated naphthalene formaldehyde condensate. SikaPlast® PH 3107 is based on a unique carboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process the same electrostatic dispersion occurs but the presence of the lateral chains linked to the polymer backbone, generate a steric hindrance which stabilizes the cement particles capacity to separate and disperse. This mechanism provides flowable concrete with greatly reduced water demand. SikaPlast® PH 3107 is suitable for use in hot and tropical climatic conditions.

Precast Concrete:
  • Production of a concrete with low water cement ratios with excellent workability retention properties which provide enough finishing time
  • Single product for many application
  • High early strength which leads to earlier demolding
For the Contractor/Applicator:
  • Easier to place and improved strength development
  • Impreved surface finish which reduces repair
For the Engineer:
  • High quality durable concrete
Inquire Now
PDS SikaPlast® PH 3107
PDS SikaPlast® PH 3107
Product Data Sheet (PDS)
SikaPlast® PH 3107 is an innovative latest generation mid range Superplasticizer based on polycarboxylic ether (PCE) polymers and is specially engineered for precast and ready mix concrete. SikaPlast® PH 3107 is differentiated from conventional superplasticizer, such as those based on sulphonated naphthalene formaldehyde condensate. SikaPlast® PH 3107 is based on a unique carboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process the same electrostatic dispersion occurs but the presence of the lateral chains linked to the polymer backbone, generate a steric hindrance which stabilizes the cement particles capacity to separate and disperse. This mechanism provides flowable concrete with greatly reduced water demand. SikaPlast® PH 3107 is suitable for use in hot and tropical climatic conditions.
PDF - 1 MB (en)

Contact us if document is not available

Show all documents

Usage

SikaPlast® PH 3107 is used for the production of high quality precast and ready-mix concrete.  

Advantages

Precast Concrete:
  • Production of a concrete with low water cement ratios with excellent workability retention properties which provide enough finishing time
  • Single product for many application
  • High early strength which leads to earlier demolding
For the Contractor/Applicator:
  • Easier to place and improved strength development
  • Impreved surface finish which reduces repair
For the Engineer:
  • High quality durable concrete

Packaging

210 L drums, 1000 L flowbin or bulk supply in tanker

Colour

Brown color liquid

Product Details

Sustainability / Certifications / Approvals

CERTIFICATES AND TEST REPORTS

SikaPlast® PH 3107 follows the requirements of ASTM C494; Type F&G and EN 934-2
Product Information

Composition

Aqueous solution of modified polycarboxylates, co-polymers

Shelf life

12 months from date of production if stored properly

Storage conditions

Store in undamaged, unopened, original sealed packaging in dry conditions at temperatures between +5 °C and +45 °C. Mix well before use.

 

Density

~1.04 kg/l (+25 °C)

pH-Value

4–7

Total chloride ion content

Nil   

(BS EN 934-2)
Technical Information

Concreting guidance

The standard rules of good concreting practice for production and placing must be observed when using SikaPlast® PH 3107 in concrete. Refer to relevant standards. Fresh concrete must be cured properly especially at high temperatures in order to prevent plastic and drying shrinkage. Use Sika® Antisol® products as a curing agent or apply wet hessian.

Application

Application Information

Compatibility

SikaPlast® PH 3107 is suitable for mixes containing all types of cement and supplementary cementitious materials such as:

Microsilica (Silica Fume), Fly Ash (PFA), GGBS (ground granulated

blast furnace slag) and the following Sika products:
▪ SikaPump®
▪ Sika® FerroGard®
▪ SikaFume®
▪ SikaFiber®
▪ Sika® Aer
▪ Sika® Stabilizer
▪ SikaControl®
We recommend to preform trial mixes to establish the required performance when combining SikaPlast® PH 3107 with the above products or other admixtures. Please consult our Sika Technical Department.

Dispensing

SikaPlast® PH 3107 is a ready-to-use admixture to be added to the concrete as a separate component. Optimal result is obtained if SikaPlast® PH 3107 is poured into the concrete mix right after the addition of the first 80 % of the mixing water, i.e. when all solids are wetted. Avoid adding the admixture to the dry aggregates.
Consumption

Recommended dosage

The normally recommended dosage rate of SikaPlast® PH 3107 is 0.6 to 2.0 litre per 100 kg of total binder. Site trials must be conducted to determine the optimum dosage as per project requirements.

Documents