Show all documents

Sikafloor® MultiFlex PS-32

SMOOTH, UNICOLOR, TOUGH-ELASTIC POLYURETHANE FLOOR COVERING

Sikafloor® MultiFlex PS-32 is a multipurpose, tough-elastic and smooth polyurethane flooring system and is part of the Sikafloor® Multiflex flooring range.
Sikafloor® MultiFlex PS-32 is especially designed for use in different indoor industrial applications where seamless, smooth and glossy hard-wearing floors are required.
Sikafloor® MultiFlex PS-32 consists of a tough-elastic, crack bridging polyurethane base coat which fulfils as well the stringent demands for low VOC emitting products. Suitable for use in hot and tropical climatic conditions.

  • Good mechanical resistance
  • Crack-bridging properties
  • Good chemical resistance
  • Scratch resistant surface
  • Low dirt pick up
  • Easy to clean and maintain
  • Seamless, gloss and smooth surface
  • Low VOC content
  • Flexible and tough-elastic
 
Inquire Now
Show all documents

Usage

  • Life Science industry
  • Automotive industry
  • Food & Beverage industry
  • Industrial flooring for Storage, Logistic and Sales areas
  • Retail (e.g. Shopping Malls)

Advantages

  • Good mechanical resistance
  • Crack-bridging properties
  • Good chemical resistance
  • Scratch resistant surface
  • Low dirt pick up
  • Easy to clean and maintain
  • Seamless, gloss and smooth surface
  • Low VOC content
  • Flexible and tough-elastic
 

Packaging

Please refer to the individual Product Data Sheets

Appearance

Smooth, glossy finish

System Details

Sustainability / Certifications / Approvals

SUSTAINABILITY

Emission test according to the German AgBB-scheme and guidelines of the DiBt (AgBB – Committee for Health-related Evaluation of Building Products, DiBt – German Institute for Building Technology). Sampling, testing and evaluation were performed according to ISO-16000, Report No. 392-2015-00212801_D_DE_02., Eurofins Product Testing A/S, Denmark.

APPROVALS / CERTIFICATES

  • Static crack bridging properties tested at IBOS GmbH, test report NO: 51-15-0056
  • Fire classification reports No. 20150909/01 MPA Dresden
  • Particle (vs.PA6) emission certificate: Cleanroom Suitable Materials - CSM. Statement of Qualification, class ISO 4. Tested by IPA report No. SI_1506-767.
  • Particle (vs.PA6) emission certificate: Cleanroom Suitable Materials - CSM. Statement of Qualification, GMP A. Tested by IPA report No. SI_1506-767.
  • Outgassing VOC emission certificate: Cleanroom Suitable Materials - CSM. Statement of Qualification, ISO-AMCm class -7.3. Tested by IPA report No. SI_1506-767
  • Biological Resistance Class “Very Good “–Cleanroom Suitable Materials. Evaluation of the biological resistance in accordance with ISO 846. Tested by IPA report No. SI_1506-767.

 
System information

Shelf life

Please refer to the individual Product Data Sheets

Storage conditions

Please refer to the individual Product Data Sheets

System Structure

Sikafloor® MultiFlex PS-32

02-en-MultiFlex_2_S_g-1000

Layer

Product

Consumption

1. Primer

Sikafloor®-161

~0.4 kg/m2

2. Base coat

Sikafloor®-3240

~1.8 kg/m2/layer (~1 mm thickness)

(filled 1:0.5 with quartz sand 0.1-0.3 mm)

(mixture)

Consumptions are theoretical and do not include any wastage or additional materials needed due to porosity, substrate profile etc.
As optional primer Sikafloor®-161 (G) can be used. Please refer to the individual Product Data Sheet.

Composition

Polyurethane

Nominal Thickness

~2 mm

Volatile organic compound (VOC) content

Very low content of Volatile Organic Compounds. It fulfils the stringent demands for indoor air quality and low VOC emitting products AgBB, AFFSET, A+.
Technical Information

Shore D Hardness

~60 (7 days / 23 °C / 50 % r.h.)

(DIN 53505)

Abrasion Resistance

~65 mg (14 days / +23 °C / 50 % r.h.)

(STM D 4060)

Tensile Strength

~14 N/mm2 (14 days / 23 °C / 50 % r.h.)

(DIN EN ISO 527-2)

Crack Bridging Ability

0.8 mm

(EN 1062-7)

Reaction to Fire

Bfl-s1

(EN 13501-1)

Chemical Resistance

Sikafloor® MultiFlex PS-32 is resistant to many chemicals. Please refer to the chemical resistance of Sikafloor® -3240.

Microbiological Resistance

Class “Good “

ISO 846

Skid / Slip Resistance

R10

(DIN 51130)

 

Application

Application Information

Applied Product Ready for Use

Temperature

Foot traffic

Light traffic

Full cure

+10 °C

~48 hours

~5 days

~14 days

+20 °C

~24 hours

~3 days

~7 days

+30 °C~16 hours~2 days~5 days

Note: Times are approximate and will be affected by changing ambient and substrate conditions
Application steps

CLEANING

Please refer to the Sikafloor® Cleaning Regime

Documents