Product Data Sheet Show all documents

SikaWall®-100 Level BH

ONE COMPONENT CEMENTITIOUS LEVELLING PUTTY

SikaWall®-100 Level BH is a single component, cementitious, polymer modified, pore sealing and levelling putty. Suitable for use in hot and tropical climatic conditions.

  • Easy to mix, apply and finish
  • Easy to use, mix with water only
  • User friendly application, excellent workability
  • Good mechanical strength
  • Non-corrosive
  • Adjustable consistency
  • Economical
  • Good water resistance
Inquire Now
Product Data Sheet Show all documents

Usage

SikaWall®-100 Level BH is used as a:
  • Pore sealer / fairing coat on cementitious substrates.
  • Levelling cementitious putty on uneven substrates and profiled concrete surfaces for external and internal finishing.
  • External vertical application as a thin smoothing layer for building and civil construction and as a color matching coat.
  • Internal walls before application of decorative paints.
  • Repair mortar to fill small honeycombing, pores.
  • Repair mortar for small defects on edges and to form covings.  

Advantages

  • Easy to mix, apply and finish
  • Easy to use, mix with water only
  • User friendly application, excellent workability
  • Good mechanical strength
  • Non-corrosive
  • Adjustable consistency
  • Economical
  • Good water resistance

Packaging

5 x 5 kg bag per box, 20 kg bag and 25 kg bag

Colour

White powder

Product Details

Product Information

Composition

Cementitious polymer composition

Shelf life

12 months from date of production.

Storage conditions

Store in undamaged, unopened, original sealed packaging in dry condition, at temperatures between +5 °C and +35 °C. Protect from direct sunlight, heat and moisture.

Maximum grain size

75 μm (micrometre)

 
Technical Information

Compressive strength

28 days

w/p=0.45

~8 N/mm2

Tensile adhesion strength

 ~1.0 N/mm2

(ASTM C1583)

Application

Application Information

Mixing ratio

2.15 - 2.25 L of water per 5 kg bag
8.6 - 9.0 L of water per 20 kg bag

10.75 - 11.25 L of water per 25 kg bag

Layer thickness

Min. 0.20 mm

Max. 1.00 mm (per single layer)

(3.00 mm locally, for blowholes and minor defects)

Ambient air temperature

+5°C min. / +35°C max.

Substrate temperature

+5°C min. / +35°C max.

Pot Life

~5 h (+23 °C)

Fresh mortar density

~1.4 kg/l (+25 °C)
Application steps

MIXING

Mix SikaWall®-100 Level BH bag with the necessary, above mentioned, amount of water, using an electric blender with a suitable mixing spiral at low speed, in a clean bucket for at least 3 minutes. Obtain a smooth paste free of lumps. Use a blender at 500 rpm maximum. Do not mix at faster rate because of mechanical strength decay of the cured product. The obtained mix result is very creamy, easily spreadable and thixotropic.

APPLICATION

SikaWall®-100 Level BH can be applied with a spatula or trowel directly onto the substrate. Build up the coat required on layers until achieving the level of fairness required. Allow each coat to dry before applying next coat. As soon as the final coat has started to set it can be smoothed by wooden or synthetic float, styrofoam block or sponge.

Application of thick layers is not advisable due to the tendency of surface cracking on drying.

CLEANING OF EQUIPMENT

Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be mechanically removed.

 

Documents