Product Data Sheet Show all documents

SikaWall®-9004 Flexguard Mesh

FIBER MESH FOR EXTERIOR INSULATION AND FINISH SYSTEM (EIFS)

Balanced, open-weave glass, fiber reinforcing mesh, twisted multi-end strands treated for compatibility with SikaWall®-1030 Alpha Dry Base Coat (formerly Senergy® Alpha Dry Base Coat).

  • Easy and quick to use
  • Improves crack bridging ability of EIFS
  • Improves mechanical resistance of EIFS
  • Alkali resistant
  • Compatible with EIFS components
  • Maintains tensile strength and flexibility for long-term durability
Inquire Now
Product Data Sheet Show all documents

Usage

SikaWall®-9004 Flexguard Mesh is used as part of the exterior insulation and finish system (EIFS) build-ups.  

Advantages

  • Easy and quick to use
  • Improves crack bridging ability of EIFS
  • Improves mechanical resistance of EIFS
  • Alkali resistant
  • Compatible with EIFS components
  • Maintains tensile strength and flexibility for long-term durability

Packaging

Rolled and packed in plastic foil, 30 rolls per box.

Roll weight: 7.25 kg ± 5 %

Product Details

Sustainability / Certifications / Approvals

CERTIFICATES AND TEST REPORTS

Fire resistance (ASTM E84)
Product Information

Fibre type

Glass fibre

Shelf life

2 years when properly stored in original packaging

Storage conditions

Storage temperature between +5 °C and +35 °C. Store in a dry condition.
Protect from moisture and avoid direct sunlight exposure.

Length

~50 m

Width

~100 cm

Mass per area

~145 g/m2

Surface

Weave:

Leno

Thread

Fabric count:

20 x 16 yarns/10 cm

 

Application

Application steps

APPLICATION

Fully embed clean mesh into wet base coat and smooth with a trowel to achieve mesh embedment, with no mesh colour visible. Double layers of SikaWall®-9004 Flexguard Mesh must be applied at all inside and outside corners, or back wraping, if special type of corner beads are not being used (refer to separate Product Data Sheet of corner bead). Window corners require secondary reinforcement as per details. Lap SikaWall®-9004 Flexguard Mesh 64 mm minimum at edges.

Documents