Product Data Sheet Show all documents

SikaWall® Level SG

ONE COMPONENT CEMENTITIOUS LEVELING PUTTY

SikaWall® Level SG is a single component, cementitious, polymer modified pore sealing and levelling putty. Suitable for use in hot and tropical climatic conditions.

SikaWall® Level SG is one component material, with the following advantages:
  • Easy to mix, apply and finish
  • Easy to use; mix with water only
  • User friendly application; excellent workability
  • Good mechanical strengths
  • Non-corrosive
  • Adjustable consistency
  • Economical
Inquire Now
Product Data Sheet Show all documents

Usage

SikaWall® Level SG is used as a:
  • Pore sealer / fairing coat on cementitious substrates
  • Levelling cementitious putty on uneven substrates and profiled concrete surfaces for external and internal finishing
  • Thin smoothing layer on vertical areas in building and civil engineering construction before application of decorative paints
  • Repair mortar to fill small honeycombing, pores
  • Repair mortar for small defects on edges and to form covings
 

Advantages

SikaWall® Level SG is one component material, with the following advantages:
  • Easy to mix, apply and finish
  • Easy to use; mix with water only
  • User friendly application; excellent workability
  • Good mechanical strengths
  • Non-corrosive
  • Adjustable consistency
  • Economical

Packaging

5, 20 and 25 kg bag

Colour

White powder

Product Details

Product Information

Composition

Cementitious polymer composition

Shelf life

12 months from date of production.

Storage conditions

Store in undamaged, unopened, original sealed packaging in dry condition at temperatures between 5 °C and 35 °C. Protect from direct sunlight, heat and moisture.

Density

~1.7 kg/l (25 °C) (fresh mortar)
Technical Information

Compressive strength

> 15 N/mm2 (28 d)

(ASTM C109)

Tensile adhesion strength

~1.0 N/mm2 (28 d)

(ASTM D4541)

Application

Application Information

Mixing ratio

1.6 - 1.7 L of water per 5 kg bag

6.4 - 6.8 L of water per 20 kg bag

8 - 8.5 L of water per 25 kg bag

Note: Water to powder (w/p) ratio = 0.32 - 0.34

Layer thickness

Min.  0.20 mm

Max. 1.00 mm (per single layer)

Ambient air temperature

5 °C min. / 45 °C max.

Substrate temperature

5 °C min. / 45 °C max.

Pot Life

~3 h (23 °C)
Application steps

MIXING

Mix a bag with the necessary, above mentioned, amount of water, using an electric blender with a suitable mixing spiral, at low speed, in a clean bucket for at least 3 minutes, to obtain a smooth paste free of lumps. Use a blender at 500 rpm maximum; do not mix at faster rate because of mechanical strength decay of the cured product. The obtained mix results should be very creamy, easily spreadable and thixotropic.

APPLICATION

Apply SikaWall® Level SG on damp surfaces using putty knife. Build up the coat required on layers until achieving the level of fairness required. Allow each coat to dry first before applying next coat. As soon as the final coat has started to set it can be smoothed by wooden or synthetic float, styrofoam block or sponge.

workability

≥ 120 min. (37 °C)

CLEANING OF EQUIPMENT

Application and mixing tools should be cleaned with water while material is still fresh. Hardened material can only be removed mechanically.

Documents