Product Data Sheet Show all documents

Sika Boom®-114 Multi Purpose

EXPANSIVE POLYURETHANE FIXING, INSULATING AND FILLING MULTI PURPOSE FOAM

Sika Boom®-114 Multi Purpose is a 1-component, fast curing polyurethane foam made for easy application. Suitable for use in hot and tropical climatic conditions.

  • 1-Component
  • Closed cell structure, restistant to water absorption
  • Easy application with nozzle
  • High expanding rate
  • Fast curing
  • Very good thermal insulation
  • Effective sound dampening
  • CFC free
Product Data Sheet Show all documents

Usage

Sika Boom®-114 Multi Purpose is designed for fixing, insulating and filling connection joints around windows and door frames, pipe entries, air-conditioning vents and electrical equipment. Sika Boom®-114 Multi Purpose allows insulation against noise, cold and draughts after a single application.  

Advantages

  • 1-Component
  • Closed cell structure, restistant to water absorption
  • Easy application with nozzle
  • High expanding rate
  • Fast curing
  • Very good thermal insulation
  • Effective sound dampening
  • CFC free

Packaging

750 ml can with rubber valve, 12 cans per box

Colour

Light yellow

Product Details

Sustainability / Certifications / Approvals

SUSTAINABILITY

VOC content < 50 g/L (US EPA Method 24)
Product Information

Composition

1-Component polyurethane

Shelf life

Sika Boom®-114 Multi Purpose has a shelf life of 12 months from the date of production, if stored properly in undamaged, original, sealed packaging, and if the storage conditions are met. Opened cans of Sika Boom®-114 Multi Purpose must be used within 2 weeks.

Storage conditions

Sika Boom®-114 Multi Purpose shall be stored in an upright position, in dry conditions, protected from direct sunlight and at temperatures between +5 °C and +25 °C.

Density

~14-30 kg/m3

 
Technical Information

Compressive Strength

35 kPa - 100 kPa at 10% compression

Water Absorption

~0.03 % in volume

Service Temperature

−30 °C min. / +80 °C max.

Application

Application Information

Ambient Air Temperature

Optimal

+20 °C

Permissable

+10 °C min. / +35 °C max.

Relative Air Humidity

30 % min. / 95 % max.

Curing Time

fully cured after 12 h (23 °C / 50 % r.h.)

Cutting Time

~60 min (23 °C / 50 % r.h.)

Tack free time

~15 min (23 °C / 50 % r.h.)
Consumption

Yield

~5.6 L / 100 mL
Application steps

APPLICATION INSTRUCTIONS

For the application of Sika Boom®-114 Multi Purpose all generally accepted rules of building and construction apply.

SUBSTRATE PREPARATION

The substrate must be clean, sound and homogeneous, free from oils, grease, dust and loose or friable particles. Paint, cement laitance and other poorly adhering contaminants must be removed. Sika Boom®-114 Multi Purpose adheres without primers and/or activators.
Pre-dampen the substrate with clean water, this ensures that the foam cures properly and also prevents secondary foam expansion.

CLEANING OF EQUIPMENT

Clean all tools and application equipment immediately with Sika® Remover-208. Once cured, residual material can only be removed mechanically.

 

Documents