Show all documents

Sikaplan® WP Tape System

Termination, fixing and sealing tape for use with the  Sikaplan® WP Membrane System

Sikaplan® WP Tape-200 is a PVC based waterproof sealing tape with modified properties for terminations and fixings of Sikaplan® WP membranes. Suitable for use in hot and tropical climatic conditions.

  • Very good bonding attributes
  • Long-term water resistance
  • Optimized workability, thermally weldable
  • Optimized flexibility, plus tensile strength and multi-axial-elongation
  • Flexible even in cold temperatures
  • Prevents lateral water underflow
Inquire Now
Show all documents

Usage

As a waterproofing sealing tape that is heat weldable to Sikaplan® WP waterproofing membranes - Series 1100, 2101 and 2110, based on PVC. The Sikaplan® WP Tape-200 is used to connect the Sikaplan® WP membranes to the substrate and itself at edges and terminations, thereby maintaining a high quality watertight seal. It is specially designed for waterproofing in cross-sections of tunnels with special high performance, secure terminations of the Sikaplan® WP Membrane System.  

Advantages

  • Very good bonding attributes
  • Long-term water resistance
  • Optimized workability, thermally weldable
  • Optimized flexibility, plus tensile strength and multi-axial-elongation
  • Flexible even in cold temperatures
  • Prevents lateral water underflow

Packaging

Roll size

200 mm (width) × 20 m (length)

System Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

  • Hydrostatic pressure tested to confirm functionality, according to Schälicke, H. and Gerstewitz, T. by MFPA Weimar, Germany - Test report No. B 16.14.047.05
System information

Shelf life

18 months from date of production

Storage conditions

Rolls must be stored in their original packaging and in cool and dry conditions at temperatures between +5 °C and +35 °C. They must be protected from direct sunlight, rain, snow and ice, etc.
Do not stack pallets of rolls during transport or storage.

System Structure

The Sikaplan® WP Tape System consists of a modified PVC tape and Sikadur®-30 LP epoxy adhesive.

One grade of the tape is available:

  • Sikaplan® WP Tape-200 (width: 200 mm)

Note: This system configuration as described must always be fully complied with and must not be changed.

Ancillary Products:

  • Sikaplan® WP Membrane Systems
  • Sarna Seam Cleaner

Compatibility

Sikaplan® WP Tape System is compatible with Sikaplan® WP 1100 Series, Sikaplan® WP 2101 Series and Sikaplan® WP 2110 Series
Technical Information

Tensile Strength

> 14 N/mm2

(EN ISO 527)

Elongation

≥ 300 % (machine / cross direction)

(EN ISO 527)

Tear Strength

≥ 42 kN/m (V = 50 mm/min)

(ISO 34 Method B)

Reaction to Fire

Class E

(EN ISO 11925-2 / EN 13501-1)

Service Temperature

-10 °C min. / +35 °C max.

Application

Application Information

Ambient Air Temperature

+5 °C min. / +55 °C max.

For installation below +5 °C ambient temperature, special measures are required in accordance with relevant national regulations and Sika guidelines.
Application consumption

Consumption

~0.9 kg/m of Sikadur®-30 LP

Note: The consumption is dependent on substrate surface roughness, size of exposed aggregate, thickness required etc.
Application steps

SUBSTRATE QUALITY

The substrate must be mechanically prepared for example, by blast-cleaning, to make it free from any cement laitance, damaged concrete, old surface treatments or coatings, then all loose or friable particles must be removed to achieve a contaminant free, open textured surface.


The substrate must be dry or maximum matt damp. The substrate temperature must be minimum 3 °C above dew point conditions and condensation on the freshly applied material must be avoided. 

       

Application of adhesive
Please refer to the relevant Product Data Sheet for the specific adhesive that is to be used.

Documents