Product Data Sheet Show all documents

SikaProof® P-1201 System

FULLY BONDED, POST‐APPLIED FPO SHEET MEMBRANE WATERPROOFING SYSTEM FOR BASEMENT AND BELOW GROUND STRUCTURES

SikaProof® P-1201 System is a fully bonded composite sheet membrane waterproofing system for reinforced concrete structures. It consists of an embossed flexible polyolefin (FPO) based membrane SikaProof® P-1200 and a 2 component PU adhesive SikaProof® Adhesive-01. SikaProof® P-1201 System is cold-applied and post-applied onto the hardened reinforced concrete structure, without use of heat or open-flames. Suitable for use in hot and tropical climatic conditions.

  • Fully bonded onto the hardened concrete structure
  • No lateral water underflow between the reinforced concrete structure and the membrane system
  • Highly flexible with crack‐bridging abilities
  • High watertightness tested according various standards
  • Easy to install with fully adhered joints (no welding required)
  • Cold applied (no heat or open flames required)
  • Temporary resistant to weathering and UV‐light during construction
  • Resistant to aging
  • Resistant to aggressive mediums and gases in natural ground water and soil
  • Can be combined with other approved Sika Waterproofing / Joint Sealing Systems
Product Data Sheet Show all documents

Usage

Damp‐proofing, waterproofing and concrete protection for basements and other below ground structures against ground water ingress. Suitable for use on:
  • Vertical reinforced concrete walls
  • Horizontal reinforced concrete slabs, protrusions, decks and podiums
  • Extensions and reconstruction works
  • Prefabricated structures
 

Advantages

  • Fully bonded onto the hardened concrete structure
  • No lateral water underflow between the reinforced concrete structure and the membrane system
  • Highly flexible with crack‐bridging abilities
  • High watertightness tested according various standards
  • Easy to install with fully adhered joints (no welding required)
  • Cold applied (no heat or open flames required)
  • Temporary resistant to weathering and UV‐light during construction
  • Resistant to aging
  • Resistant to aggressive mediums and gases in natural ground water and soil
  • Can be combined with other approved Sika Waterproofing / Joint Sealing Systems

Packaging

Please refer to the individual Product Data Sheet

System Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

  • Function test, Wissbau, according German standards, test report No. 2016-397
System information

Shelf life

Please refer to the individual Product Data Sheet

Storage conditions

Please refer to the individual Product Data Sheet

System Structure

SikaProof® P-1201 System

Waterproofing Membrane

SikaProof® P‐1200

Adhesive

SikaProof® Adhesive-01

See current Method Statement of the SikaProof® P-1201 System for compatible accessories and complementary products used to create the relevant details and connections.
Technical Information

Resistance to Root Penetration

Pass

(CEN/TS 14416)

Tensile Adhesion Strength

≥ 1.5 N/mm2

(EN 1542)

Adhesion in Peel

≥ 80 N/50 mm, to hardened structural concrete

(EN 1372)

Joint Peel Resistance

≥ 50 N/50 mm

(EN 12316-2)

Reaction to Fire

Class E

(EN 13501-1)

Accelerated Ageing in Alkaline Environment

Pass

(EN 1847) (28 d / +23 °C)

(EN 1928, Method B) (24 h / 60 kPa)

Resistance to lateral water migration

Pass, up to 7 bar (area)

(ASTM D 5385 modified)

Service Temperature

-10 °C min. / +35 °C max.

Application

Application Information

Ambient Air Temperature

+5 °C min. / +50 °C max.

Substrate Temperature

Surface to be bonded: Minimum +5 °C

Apply appropriate measures if below

Substrate Moisture Content

Dry, ≤ 4 % moisture content or contact Sika Technical Department, no rising moisture

Pot Life

Temperature

Pot Life

+20 °C

~30 min

+30 °C

~15 min

Open Time

Temperature

Open Time

+20 °C

~100 min

+30 °C

~50 min
Application consumption

Consumption

~1.50 kg/m2/mm SikaProof® Adhesive‐01

This figure is theoretical and does not include for any additional material required due to surface porosity, surface profile, variations in level or wastage etc..
Application steps

SUBSTRATE QUALITY

Reinforced concrete structure must be:
  • Hardened and of sufficient compressive strength, minimum 25 N/mm2
  • With a minimum pull-off strength of 1.5 N/mm2
  • Dry, sound, clean and free of any contaminations (example: dust, oil, grease, cement laitance, release agent, etc.)
  • Free from surface defects (example: blowholes, voids, honeycombing, cracks, protrusions, etc.)

SUBSTRATE PREPARATION

The concrete or other suitable cementitious substrate must meet the defined substrate quality. If the substrate does not fulfil the requirements, the surface must be pre-treated prior to the application, in order to prevent any subsequent damage to the membrane sheets.
For more detailed information and guidance please refer to the current Method Statement for the SikaProof® P-1201 System.

Documents