Product Data Sheet Show all documents

SikaProof® Tape-150 A

FULLY BONDED, SELF‐ADHESIVE TAPE FOR INTERNAL JOINTING OF SIKAPROOF A WATERPROOFING SYSTEM

SikaProof® Tape-150 A is a self‐adhesive tape, based on a polyacrylate adhesive on a yellow carrier film coated with the SikaProof A fully bonded system. Suitable for use in hot and tropical climatic conditions.

  • Fully bonded to the concrete structure
  • No lateral water underflow (like SikaProof® A system)
  • High adhesion and sealing ability, especially in cool and damp conditions
  • Easy and fast to install
Product Data Sheet Show all documents

Usage

SikaProof® Tape-150 A is used for sealing transverse overlap joints, connections and details within the SikaProof A membrane system (internal / fleece side) in combination with the SikaProof ExTape‐150.  

Advantages

  • Fully bonded to the concrete structure
  • No lateral water underflow (like SikaProof® A system)
  • High adhesion and sealing ability, especially in cool and damp conditions
  • Easy and fast to install

Packaging

2 rolls packed in one cardboard box, each roll 25 m long and 150 mm width

Colour

Top layer with white fleece and sealant (SikaProof® fully bonded system) coated on a yellow carrier film. Bottom layer with polyacrylate adhesive cover with a white release film.

Product Details

Product Information

Shelf life

18 months shelf life from date of production if stored properly in undamaged, unopened, original sealed packaging. (For expiry date see label)

Storage conditions

Dry storage at temperatures from +5 °C up to +30 °C. Protect from direct sunlight, rain, snow, ice, humidity, etc. Store in a horizontal position. Do not stack pallets of the rolls on top of each other, or under pallets of any other materials during transport or storage.

Thickness

1.70 mm
System information

System Structure

SikaProof® Tape-150 A is a system component for internal jointing of the SikaProof® A membrane system in combination with SikaProof® ExTape‐150 for external jointing. For more detailed information please refer to the current Method Statement.

 

Application

Application Information

Ambient Air Temperature

+5 °C min. / +45 °C max.

Substrate Temperature

Surface to be bonded: Minimum +5 °C, if below appropriate measures must be applied.
Application steps

SUBSTRATE QUALITY

The contact surface among others is the white fleece layer of SikaProof® A sheet membrane. It must be dry (or slightly damp), clean and free of any materials that could impair adhesion.

Documents