Product Data Sheet Show all documents

SikaGrind® ES 2102

(former MCem ES 2102)

Cement additive engineered for enhancement of cement early strength and reduction of unit                                                                                                                                                                                  grinding energy/increase of cement mill throughput

SikaGrind® ES 2102 is a liquid, ready-to-use cement additive designed to enhance cement performance. In addition to acting as a Grinding Aid in the milling process and a flow aid in cement conveyance, SikaGrind® ES 2102 improves specific cement properties by the activity of its chemical components. These act in the modification of clinker characteristics and in the enhancement of its hydraulic properties.
Products of the SikaGrind® ES series are specifically designed to increase early strength of cement. These benefits can be used either for achieving superior product performance or for cement optimization while maintaining the original performance level.
SikaGrind® ES 2102 improves the flow characteristics of cement with positive impact on cement conveyance and reduction of pack-set in storage.

SikaGrind® ES 2102 offers the following benefits to cement producers :
  • Cost reduction due to lower unit grinding energy (kWh/t) and optimization of cement fineness and composition while maintaining cement properties.
  • Capacity extension due to higher mill throughput and optimized cement recipe.
  • Product differentiation due to enhanced cement performance and improved properties for the final application.
  • Improved cement handling due to faster cement conveyance through the plant and in the distribution logistics. Reduction of plant stops and optimized storage in silos.
  • Good working environment due to low dust generation.
Product Data Sheet Show all documents

Usage

SikaGrind® ES 2102 is developed for application in the cement grinding process in :
▪ Ball mills (closed and open circuits)
▪ Vertical mills
▪ Other grinding systems, such as: GGBS grinding  

Advantages

SikaGrind® ES 2102 offers the following benefits to cement producers :
  • Cost reduction due to lower unit grinding energy (kWh/t) and optimization of cement fineness and composition while maintaining cement properties.
  • Capacity extension due to higher mill throughput and optimized cement recipe.
  • Product differentiation due to enhanced cement performance and improved properties for the final application.
  • Improved cement handling due to faster cement conveyance through the plant and in the distribution logistics. Reduction of plant stops and optimized storage in silos.
  • Good working environment due to low dust generation.

Packaging

SikaGrind® ES 2102 is available in bulk and Intermediate Bulk Container (IBC)

Colour

Brown liquid

Product Details

Sustainability / Certifications / Approvals

CERTIFICATES AND TEST REPORTS

SikaGrind® ES 2102 fulfils the European cement standard EN 197.1.
Product Information

Shelf life

If stored in unopened containers according to manufacturer’s instructions, the shelf life is 12 months.

Storage conditions

It is recommended to store SikaGrind® ES 2102 at temperatures above 5°C. Pipes should be thermally isolated.

 

Density

1.1–1.14 g/cm³ at 25°C

pH-Value

7–9

Application

Application Information

Compatibility

SikaGrind® ES 2102 is compatible with all types of cements.
Application steps

APPLICATION INSTRUCTIONS

SikaGrind® ES 2102 can be metered onto the mill feeders or injected into the mill. The recommended dosage rate is between 300 - 600g per ton of cement. Other dosages may be required in specific situations. The optimum dosage should be evaluated in plant trials. For further information please consult Sika Technical Service Department.
Calibrated dosing equipment with an adjustable flow rate and appropriate dosage range is recommended to obtain the maximum performance of the product.

 

Documents