Product Data Sheet Show all documents

Sika® Antisol®-101 W

(former MKure 101W)

Acrylic resin water based curing and sealing compound for concrete

Sika® Antisol®-101 W is a solvent free non-degrading, membrane-forming liquid curing compound based on an acrylic resin emulsion suitable for spray application and freshly poured concrete.
The resultant film retains sufficient moisture in the concrete to ensure full hydration of the cement; essential for optimum strength development. The cured concrete is typically harder and exhibits a dust free surface with a reduced incidence of drying shrinkage cracks.
Additionally, the membrane acts as a primer system for many subsequent surface finishes that do not rely on penetration for substrate bond.
When applied to floors, Sika® Antisol®-101 W seals and dustproofs the surface, eliminating the primary source of abrasion and enhancing durability. Suitable for use in hot and tropical climatic conditions.  

  • Eliminates the need for water curing
  • Imparts a harder dust free surface
  • Does not support the growth of bacteria
  • Non degrading, acts as a primer system
  • Minimal delay for overcoating etc.
  • Abrasion resistant floors
  • High curing efficiency
  • Reduced labour costs
  • Reduces chloride penetration
Product Data Sheet Show all documents

Usage

As a more effective and economical alternative to separate curing and priming/sealing regimes.
  • Suitable for use on most concrete surfaces
  • Surfaces subject to certain finishing treatments
  • Economical enhancement of concrete flatwork

Advantages

  • Eliminates the need for water curing
  • Imparts a harder dust free surface
  • Does not support the growth of bacteria
  • Non degrading, acts as a primer system
  • Minimal delay for overcoating etc.
  • Abrasion resistant floors
  • High curing efficiency
  • Reduced labour costs
  • Reduces chloride penetration

Packaging

Cans and drums

Colour

White liquid

Product Details

Sustainability / Certifications / Approvals

CERTIFICATES AND TEST REPORTS

Sika® Antisol®-101 W follows the requirements of ASTM C 309; Type 2; Class B and AASHTO M-148
Product Information

Composition

Aqueous solution of acrylic copolymer dispersion

Shelf life

12 months from date of production if stored properly

Storage conditions

Store in undamaged, unopened, original sealed packaging in dry conditions at temperatures between +5°C and +50°C. Protect from direct sunlight, heat, moisture and frost.

Density

~1.03 kg/l (+25°C)

Volatile organic compound (VOC) content

< 10 g/l

Application

Consumption

Consumption

The rate of coverage depends on wind, humidity and temperature.
As a general guide: 4.5 – 5.5 m²/l
Application steps

APPLICATION

The compound should be spray applied as evenly as possible to the freshly placed concrete.
For horizontal surfaces the Sika® Antisol®-101 W should be applied as soon as the initial surface sheen has disappeared from the concrete face. In the case of formed concrete, the product should be applied immediately on removal of the formwork.

Documents