Contact us if document is not available

Show all documents

SikaPaver®-762

(former MCast 762)

New generation plasticizer for Manufactured Concrete Products

SikaPaver®-762 is an innovative multipurpose plasticizer specially developed for manufactured concrete products. The product is suitable for the production of blocks and pavers. At the same time, SikaPaver®-762 accelerates the strength development and reduces the cycle time whilst the appearance is maintained or even improved.
Due to its unique principle of action on the cement grain, SikaPaver®-762 fully exploits the hydration potential of cement resulting in higher early strengths and shorter curing times.
Suitable for use in hot and tropical climatic conditions.

  • Less wear of moulds.
  • Improved cohesion.
  • Reduced water absorption.
  • Increased strength.
  • Applicable for all Portland and Slag cements.
Inquire Now

Contact us if document is not available

Show all documents

Usage

SikaPaver®-762 is suitable for manufacturing concrete products, especially:
  • Pavers
  • Blocks
 

Advantages

  • Less wear of moulds.
  • Improved cohesion.
  • Reduced water absorption.
  • Increased strength.
  • Applicable for all Portland and Slag cements.

Packaging

Drums, 1000 L IBCs or bulk supply in tanker

Colour

Dark brown liquid

Product Details

Sustainability / Certifications / Approvals

CERTIFICATES AND TEST REPORTS

SikaPaver®-762 follows the requirements of EN 934-2, Table 2
Product Information

Shelf life

12 months from date of production if stored properly

Storage conditions

Store in undamaged, unopened, original sealed packaging in dry conditions at temperatures between +5°C and +50°C. Mix well before using.

Density

~1.19 kg/l (+25°C)

Total chloride ion content

Nil

(EN 934-2)

 

Application

Application Information

Dispensing

SikaPaver®-762 is a liquid ready-to-use admixture to be added to the concrete during the mixing process. The best results are obtained when the admixture is added after all the other components are already in the mixer and after the addition of at least 80% of the total water. The water content is adjusted to obtain the desired consistency or workability.
Consumption

Recommended dosage

0.3 - 0.7 % by weight of binder
Other dosages by weight of binder can be used depending on the mix design, raw materials, climatic conditions and concrete requirements. Trial mixes must be performed to establish the exact dosage rate required.
Please consult our Technical Services Department.

Documents