Sikafloor® MultiDur EB-16 UV (G)
Sikafloor® MultiDur EB-16 UV (G) is an economical, slip and UV resistant, coloured, flooring system. Suitable for use in trafficable applications. Suitable for use in hot and tropical climatic conditions.
- High wear resistance
- High mechanical resistance
- Good chemical resistance
- Easy application
- Liquid proof
- Gloss finish
- Slip resistant
- UV resistant
System Structure
Usage
- For concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps.
- For multi-story, underground and exposed car parks where a rigid coating with UV resistance is required.
Advantages
- High wear resistance
- High mechanical resistance
- Good chemical resistance
- Easy application
- Liquid proof
- Gloss finish
- Slip resistant
- UV resistant
Colour
Available in various colour shades. Refer to individual Product Data Sheet of top coat.
Appearance
Slip resistant, matt finish
System Details
System structure
Sikafloor® MultiDur EB-16 UV (G) system (~1 mm)
| 1. Primer + broadcast in excess | Sikafloor®-151/-161/-161 G + broadcast with quartz sand in excess |
| 2. Wearing coat | Sikafloor®-264/-264 SG |
| 3. Top coat | Sikafloor®-359 AE/-359 BH |
Composition
Epoxy primer, Epoxy body coat and Polyurethane topcoat
Nominal thickness
~1.0 mm
Chemical resistance
Refer to the chemical resistance of Sikafloor®-359 AE/-359 BH
Temperature resistance
| Exposure* | Dry heat |
| Permanent | +50 °C |
| Short-term max. 7 d | +80 °C |
| Short-term max. 12 h | +100 °C |
Short-term moist/wet heat* up to +80 °C where exposure is only occasional (i.e. during steam cleaning etc.)
*No simultaneous chemical and mechanical exposure.
Application
Waiting time to overcoating
Before applying Sikafloor®-264/-264 SG on Sikafloor®-151/-161/161 G allow:
| Substrate temperature | Minimum | Maximum |
| +10 °C | 24 hours | 3 days |
| +20 °C | 12 hours | 2 days |
| +30 °C | 8 hours | 1 day |
Before applying Sikafloor®-359 AE/-359 BH on Sikafloor®-264/-264 SG allow:
| Substrate temperature | Minimum | Maximum |
| +10 °C | 30 hours | 48 hours |
| +20 °C | 24 hours | 24 hours |
| +30 °C | 16 hours | 30 hours |
Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.
Applied product ready for use
| Temperature | Foot traffic | Light traffic | Full cure |
| +10 °C | ~72 hours | ~6 days | ~10 days |
| +20 °C | ~24 hours | ~4 days | ~7 days |
| +30 °C | ~18 hours | ~2 days | ~5 days |
Consumption
Sikafloor® MultiDur EB-16 UV (G) system (~ 1.0 mm)
| Coating System | Product | Consumption |
| Primer | Sikafloor®-151/-161/-161 G | ~0.3 – 0.5 kg/m² |
| Broadcast in excess | quartz sand 0.3 – 0.7 mm (e.g. Sikadur-507) | ~1.0 – 1.5 kg/m² |
| Wearing coat | Sikafloor®-264/-264 SG | ~0.25 – 0.35 kg/m² |
| Top coat | Sikafloor®-359 AE/-359 BH | ~0.20 – 0.25 kg/m² |
These figures are theoretical and do not include any additional material required due to surface porosity, surface profile, variations in level and wastage etc..