Sikafloor® MultiDur EB-24
Sikafloor® MultiDur EB-24 is a slip resistant, coloured, epoxy covering with high mechanical resistance for flooring applications Suitable for use in hot and tropical climatic conditions.
- High wear resistance
- High mechanical resistance
- Good chemical resistance
- Easy application
- Waterproof
- Gloss finish
- Slip resistant
System Structure
1
Primer
2
Wearing coat / Top coat
3
Wearing coat
Usage
- for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps.
- for multi-storey and underground car parks and for wet process areas, e.g. beverage and food industry
Advantages
- High wear resistance
- High mechanical resistance
- Good chemical resistance
- Easy application
- Waterproof
- Gloss finish
- Slip resistant
Packaging
Please refer to the individual Product Data Sheet
Colour
Available in various colour shades.
Appearance
Slip resistant, gloss finish
System Details
APPROVALS / CERTIFICATES
- Fire classification test, Bfl-S1 according to DIN EN 13501-1, Report No.2007-B-0181/15, Germany, July 2007
- Certified by Thomas Bell-Wright International Consultants according to ASTM E648-15 (class l): Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source. Certificate number: TBW 0300229, TBW0300227, TBW 0300228.
Shelf life
Please refer to the individual Product Data Sheet
Storage conditions
Please refer to the individual Product Data Sheet
System Structure
Sikafloor® MultiDur EB-24 system (~2 – 4 mm)
1. Primer | Sikafloor®-161/-161 G |
2. Wearing coat & broadcast in excess | Sikafloor®-263 SL or Sikafloor®-264 /-264 SG broadcast with quartz sand in excess |
3. Top coat | Sikafloor®-264 /-264 SG |
Composition
Epoxy
Nominal Thickness
~2.0–4.0 mm
Chemical Resistance
Refer to the chemical resistance of Sikafloor®-264 / 264 SG
Temperature Resistance
Exposure* | Dry heat |
Permanent | +50 °C |
Short-term max. 7 d | +80 °C |
Short-term max. 12 h | +100 °C |
Short-term moist/wet heat* up to +80 °C where exposure is only occasional (i.e. during steam cleaning etc.) *No simultaneous chemical and mechanical exposure.
Skid / Slip Resistance
R11 V4 (Quartz Sand 0.3-0.8 mm) | (DIN 51130) |
R12 V6 (Quartz Sand 0.7-1.2 mm) | (DIN 51130) |
Application
Waiting Time / Overcoating
Before applying Sikafloor®-263 SL/-264/-264 SG on Sikafloor®-161/161 G allow:
Substrate temperature | Minimum | Maximum |
+10 °C | 24 hours | 3 days |
+20 °C | 12 hours | 2 days |
+30 °C | 8 hours | 1 day |
Before applying Sikafloor®-264/-264 SG on Sikafloor®-263 SL/-264/-264 SG allow:
Substrate temperature | Minimum | Maximum |
+10 °C | 30 hours | 48 hours |
+20 °C | 24 hours | 24 hours |
+30 °C | 16 hours | 30 hours |
Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity
Applied Product Ready for Use
Temperature | Foot traffic | Light traffic | Full cure |
+10 °C | ~ 72 hours | ~ 6 days | ~ 10 days |
+20 °C | ~ 24 hours | ~ 4 days | ~ 7 days |
+30 °C | ~ 18 hours | ~ 2 days | ~ 5 days |
Consumption
Sikafloor® MultiDur EB-24 system (~ 2 – 4mm)
Coating System | Product | Consumption |
Primer | 1 x Sikafloor®-160/-161 G | ~0.3 – 0.5 kg/m² |
Wearing coat | Sikafloor®-263 SL filled 1:1.25 with quartz sand 0.1 – 0.3mm | ~4 kg /m2 ( 2 kg/m² binder + 2.5 kg/m² quartz sand) |
Broadcast in excess | quartz sand 0.3 – 0.7 mm (Sikadur-507) | ~4 – 6 kg/m² |
Or, | ||
Wearing coat | Sikafloor®-264/-264 SG | ~0.25 – 0.35 kg/m² |
Broadcast in excess | quartz sand 0.3 – 0.7 mm (Sikadur-507) | ~0.6 – 1.2 kg/m² |
Top coat | 1 – 2 × Sikafloor®-264/-264 SG | ~0.25 – 0.45 kg/m² |
CLEANING
Please refer to the Method Statement Sikafloor®‐ Cleaning Regime