Product Data Sheet Show all documents

Sikafloor® MultiFlex PB-15 UV (G)

UV STABLE CAR PARK TRAFFIC DECK SYSTEM FOR INTERMEDIATE AND EXPOSED DECKS

Sikafloor® MultiFlex PB-15 UV (G) is a tough elastomeric, slip resistant and UV stable car park coating system. Sikafloor® MultiFlex PB-15 UV (G) is specifically designed to meet the requirements for car parking structure floors, traffic decks and ramps in the GCC region. Sikafloor® MultiFlex PB-15 UV (G) consists of a primer, sand aggregates, a tough elastic crack bridging polyurethane mid coat and a high UV resistant top coat. Sikafloor® MultiFlex PB-15 UV (G) is available in a wide range of colors and is complemented by the Sika range of Line Marking and Anti Carbonation coating systems. Suitable for use in hot and tropical climatic conditions.

  • High mechanical resistance
  • Good chemical resistance
  • Good UV resistance
  • Low dirt pick up
  • Easy to clean and maintain
  • Seamless
  • Anti-slip surface
  • Low VOC content
Inquire Now
Product Data Sheet Show all documents

System Structure

1

Base coat

Sikafloor®-3240

2-PART PUR TOUGH-ELASTIC, LOW-VOC, SELF SMOOTHING FLOOR
OR
Sikafloor®-324

Tough-elastic, low-VOC, aromatic polyurethane resin

2

Top coat

Sikafloor®-359 SG

2-part PUR Tough-elastic Coloured Seal Coat

Usage

  • Car Parks, intermediate, exposed decks and ramps
  • Automotive industry
  • Industrial flooring for storage, logistics centers and warehouses, etc.
 

Advantages

  • High mechanical resistance
  • Good chemical resistance
  • Good UV resistance
  • Low dirt pick up
  • Easy to clean and maintain
  • Seamless
  • Anti-slip surface
  • Low VOC content

Colour

Almost unlimited choice of colour shades. Please refer to the Sikafloor® color chart.

Appearance

Slip resistant, matt or gloss finish top coat option

System Details

Sustainability / Certifications / Approvals

CERTIFICATES AND TEST REPORTS

  • Refer to individual PDS for further approvals and certificates
 
System information

System structure

Sikafloor® MultiFlex PB-15 UV (G)

LayerProductConsumption
1. Primer

Sikafloor®-151, or

Sikafloor®-161, or

Sikafloor®-161 G, or

Sikafloor®-161 QA

~0.3 kg/m2/layer
+ Aggregate brodcast
0.3 - 0.7 mm (e.g. Sikadur®-507)		~1.0 kg/m2
2. Base coatSikafloor®-324 / -3240~0.5 kg/m2
3. Top Coat

Sikafloor® TC 257, or

Sikafloor®-359 AE, or

Sikafloor®-359 BH, or

Sikafloor®-359 N, or

Sikafloor®-359 SG

~0.25 kg/m2

Note: These consumption figures are theoretical and do not include any additional material required due to surface porosity, surface profile, variations in level and wastage etc..

Contact your local Sika® organization about availability of primer and top coat options.

Composition

Polyurethane

Nominal thickness

≥ 1.2 mm
Technical Information

Resistance to impact

Pass (at 2.0 kg*m) : No sign of crack or peeling

(ISO 6272)

Tensile adhesion strength

≥ 1.5 N/mm2 (or concrete failure)(BS 1881 - Part 207)

Crack bridging ability

~1.0 mm (+22 °C)

(ASTM C1305)

Chemical resistance

Sikafloor® MultiFlex PB-15 UV (G) always has to be sealed with UV stable top coat. Refer to the chemical resistance of top coat.

 

Documents