Product Data Sheet Show all documents

Sikafloor® MultiFlex PB-32

BROADCAST, UNICOLOR, TOUGH-ELASTIC POLYURETHANE FLOOR COVERING

Sikafloor® MultiFlex PB-32 is a multipurpose, tough-elastic and slip resistant polyurethane flooring system and is part of the Sikafloor® Multiflex flooring range.
Sikafloor® MultiFlex PB-32 is especially designed for use in many different indoor industrial applications where slip resistant, seamless hardwearing floors are required and makes use of Sika's unique i-Cure technology to improve surface aesthetics and reduce sensitivity for ambient humidity during application.
Sikafloor® MultiFlex PB-32 consists of a tough-elastic, crack bridging polyurethane base coat which fulfils as well the stringent demands for low VOC emitting products, finished with a non-blushing elastic epoxy top coat or with an i-Cure, aromatic polyurethane sealer. Suitable for use in hot and tropical climatic conditions.

  • Good mechanical resistance
  • Good chemical resistance
  • Scratch resistant surface
  • Low dirt pick up
  • Easy to clean and maintain
  • Seamless surface
  • i-Cure based technology base coat
  • Anti-slip surface
  • Low VOC content
Product Data Sheet Show all documents

Usage

  • Life Science industry
  • Automotive industry
  • Industrial flooring for storage, logistic centers
  • Car parks intermediate decks
 

Advantages

  • Good mechanical resistance
  • Good chemical resistance
  • Scratch resistant surface
  • Low dirt pick up
  • Easy to clean and maintain
  • Seamless surface
  • i-Cure based technology base coat
  • Anti-slip surface
  • Low VOC content

Packaging

Please refer to the individual Product Data Sheets

Appearance

Slip resistant, glossy finish

System Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

  • Fire classification reports No. 20150909/01 MPA Dresden
 
System information

Shelf life

Please refer to the individual Product Data Sheets

Storage conditions

Please refer to the individual Product Data Sheets

System Structure

Sikafloor® MultiFlex PB-32

02-en-MultiFlex_3_bq_m-1000

Layer

Product

Consumption

1. Primer

Sikafloor®-161

~0.4 kg/m2/layer

2. Base coat

Sikafloor®-3240

~1.8–2.0 kg/m2

(filled 1:0.5 with quartz sand 0.1–0.3 mm)
+ Aggregate broadcast 0.4 - 0.8 mm~4.0-5.0 kg/m²

3. Top Coat

Sikafloor®-378

~0.7–0.9 kg/m2

Consumptions are theoretical and do not include any wastage or additional materials needed due to porosity, substrate profile etc.
As optional primer Sikafloor®-161 (G) can be used. Please refer to the individual Product Data Sheet.

As optional top coat Sikafloor®-3240 can be used under its set of certifications and consumption rates. Please refer to the individual Product Data Sheet.

Composition

Polyurethane, Epoxy

Nominal Thickness

~3 mm
Technical Information

Shore D Hardness

~60 (7 days / 23 °C / 50 % r.h.)

(DIN 53505)

Abrasion Resistance

~24 mg (CS 10/1000/1000)

(DIN 53109)

Tensile Strength

~14 N/mm2 (14 days / 23 °C / 50 % r.h.)

(DIN EN ISO 527-2)

Reaction to Fire

Bfl-s1

(EN 13501-1)

Chemical Resistance

Sikafloor® MultiFlex PB-32 always has to be sealed with Sikafloor®-378. Refer to the chemical resistance of Sikafloor®-378.

Skid / Slip Resistance

R10 / R11

(DIN 51130)

Application

Application Information

Applied Product Ready for Use

Temperature

Foot traffic

Light traffic

Full cure

+15 °C

~72 hours

~6 days

~10 days

+20 °C~24 hours~4 days~7 days

+30 °C

~18 hours

~2 days

~5 days

Note: Times are approximate and will be affected by changing ambient and substrate conditions
Application steps

CLEANING

Please refer to the Sikafloor® Cleaning Regime

Documents