Show all documents

Sikafloor® MultiFlex PB-32 UV

BROADCAST, UNICOLOR, TOUGH-ELASTIC POLYURETHANE FLOOR COVERING WITH UV SEALER

Sikafloor® MultiFlex PB-32 UV is a multipurpose, tough-elastic and slip resistant polyurethane flooring system and is part of the Sikafloor® Multiflex flooring range.
Sikafloor® MultiFlex PB-32 UV is especially designed for use in many different industrial applications where seamless, UV and color stable, hardwearing floors are required and makes use of Sika's unique i-Cure technology to improve surface aesthetics and reduce sensitivity for ambient humidity during application.
Sikafloor® MultiFlex PB-32 UV consists of a tough-elastic, crack bridging polyurethane base coat over which a UV resistant top coat to fulfils as well the stringent demands for low VOC emitting products. Suitable for use in hot and tropical climatic conditions.

  • High mechanical resistance
  • Good chemical resistance
  • Good UV resistance
  • Scratch resistant surface
  • Low dirt pick up
  • Easy to clean and maintain
  • Seamless
  • Anti-slip surface
  • Low VOC content
Inquire Now
Show all documents

Usage

  • Life Science industry
  • Automotive industry
  • Industrial flooring for Storage, Logistic centers
  • Car parks intermediate and exposed decks and ramps
 

Advantages

  • High mechanical resistance
  • Good chemical resistance
  • Good UV resistance
  • Scratch resistant surface
  • Low dirt pick up
  • Easy to clean and maintain
  • Seamless
  • Anti-slip surface
  • Low VOC content

Packaging

Please refer to the individual Product Data Sheets

Colour

Almost unlimited choice of colour shades.

Appearance

Slip resistant, matt finish

System Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

  • Fire classification reports No. 20150909/01 MPA Dresden

 
System information

Shelf life

Please refer to the individual Product Data Sheets

Storage conditions

Please refer to the individual Product Data Sheets

System Structure

Sikafloor® MultiFlex PB-32 UV

02-en-MultiFlex_3_bq_m-1000

Layer

Product

Consumption

1. Primer

Sikafloor®-161

~0.4 kg/m2/layer

2. Base coat

Sikafloor®-3240

(filled 1:0.5 with quartz sand 0.1–0.3 mm)

~1.8–2.0 kg/m2
+ Aggregate brodcast 0.4 - 0.8 mm~4.0 -5.0 kg/m²

3. Top Coat

Sikafloor®-359 N

~0.7–0.9 kg/m2

Consumptions are theoretical and do not include any wastage or additional materials needed due to porosity, substrate profile etc.

As optional primer Sikafloor®-161 (G) can be used. Please refer to the individual Product Data Sheet.

As optional top coat Sikafloor®-359 SG can be used. Please refer to the individual Product Data Sheet.

Composition

Polyurethane

Nominal Thickness

~3 mm
Technical Information

Shore D Hardness

~60 (7 days / 23 °C / 50 % r.h.)

(DIN 53505)

Abrasion Resistance

~160 mg (CS 10/1000/1000)

(DIN 53109)

Tensile Strength

~14 N/mm2 (14 days / 23 °C / 50 % r.h.)

(DIN EN ISO 527-2)

Tensile Adhesion Strength

> 2.0 N/mm2

(EN 13892-8)

Reaction to Fire

Bfl-s1

(EN 13501-1)

Chemical Resistance

Sikafloor® MultiFlex PB-32 UV always has to be sealed with Sikafloor®-359N therefore, refer to the chemical resistance of Sikafloor®-359N.

Skid / Slip Resistance

R10 / R11

(DIN 51130)

 

Application

Application Information

Applied Product Ready for Use

Temperature

Foot traffic

Light traffic

Full cure

+15 °C

~48 hours

~5 days

~10 days

+20 °C~24 hours~3 days~7 days

+30 °C

~16 hours

~2 days

~3 days

Note: Times are approximate and will be affected by changing ambient and substrate conditions.
Application steps

CLEANING

Please refer to the Sikafloor® Cleaning Regime

Documents