Product Data Sheet Show all documents

Sikafloor® MultiFlex PS-32 UV

SMOOTH, UNICOLOR, TOUGH-ELASTIC POLYURETHANE FLOOR COVERING WITH UV SEALER

Sikafloor® MultiFlex PS-32 UV is a multipurpose, tough-elastic and smooth polyurethane flooring system and is part of the Sikafloor® Multiflex flooring range.
Sikafloor® MultiFlex PS-32 UV is especially designed for use in different indoor industrial applications where seamless, UV and colour stable, smooth and matt hardwearing floors are required and makes use of Sika's unique i-Cure technology to improve surface aesthetics and reduce sensitivity for ambient humidity during application.
Sikafloor® MultiFlex PS-32 UV consists of a tough elastic, crack bridging, i-Cure polyurethane base coat which fulfils as well the stringent demands for low VOC emitting products, over which a UV resistant sealer is applied to increase the system performances. Suitable for use in hot and tropical climatic conditions.

  • Good mechanical resistance
  • Crack-bridging properties
  • Good UV and colour stability
  • Low dirt pick up
  • Good chemical resistance
  • Scratch resistant surface
  • Easy to clean and maintain
  • Seamless, gloss and smooth surface
  • Low VOC content
  • Flexible and tough-elastic
Product Data Sheet Show all documents

Usage

  • Life Science industry
  • Automotive industry
  • Food & Beverage industry
  • Industrial flooring for Storage, Logistic and Sales areas
  • Retail (e.g. Shopping Malls)

Advantages

  • Good mechanical resistance
  • Crack-bridging properties
  • Good UV and colour stability
  • Low dirt pick up
  • Good chemical resistance
  • Scratch resistant surface
  • Easy to clean and maintain
  • Seamless, gloss and smooth surface
  • Low VOC content
  • Flexible and tough-elastic

Packaging

Please refer to the individual Product Data Sheets

Colour

Almost unlimited colour shades. Please refer to Sikafloor®-305W.

Appearance

Smooth, matt finish

System Details

Sustainability / Certifications / Approvals

SUSTAINABILITY

Emission test according to the German AgBB-scheme and guidelines of the DiBt (AgBB – Committee for Health-related Evaluation of Building Products, DiBt – German Institute for Building Technology). Sampling, testing and evaluation were performed according to ISO-16000, Report No. 392-2015-00212801_D_DE_02, Eurofins Product Testing A/S, Denmark.

APPROVALS / CERTIFICATES

  • Static crack bridging properties tested at IBOS GmbH, test report NO: 51-15-0056
  • Fire classification reports No. 20150909/01 MPA Dresden
  • Particle (vs.PA6) emission certificate: Cleanroom Suitable Materials - CSM. Statement of Qualification, class ISO 4. Tested by IPA report No. SI_1506-767.
  • Particle (vs.PA6) emission certificate: Cleanroom Suitable Materials - CSM. Statement of Qualification, GMP A. Tested by IPA report No. SI_1506-767.
  • Outgassing VOC emission certificate: Cleanroom Suitable Materials - CSM. Statement of Qualification, ISOAMCm class -7.3. Tested by IPA report No. SI_1506-767
  • Biological Resistance Class “Very Good “–Cleanroom Suitable Materials. Evaluation of the biological resistance in accordance with ISO 846. Tested by IPA report No. SI_1506-767.
System information

Shelf life

Please refer to the individual Product Data Sheets

Storage conditions

Please refer to the individual Product Data Sheets

System Structure

Sikafloor® MultiFlex PS-32 UV

02-en-comfortfloor_3_s_m-1000

Layer

Product

Consumption

1. Primer

Sikafloor®-161

~0.4 kg/m2/layer

2. Base coat

Sikafloor® -3240

(filled 1:0.5-0.7 with quartz sand 0.1-0.3 mm)

~1.8–1.9 kg/m2/layer

(~1mm thickness)

3. Top coatSikafloor®-305 W~0.15 kg/m2/layer

Consumptions are theoretical and do not include any wastage or additional materials needed due to porosity, substrate profile etc.
As optional primer Sikafloor®-161 G can be used. Please refer to the individual Product Data Sheet.

As optional top coat Sikafloor®-304 W can be used under its set of certifications and consumption rates. Please refer to the individual Product Data Sheet.

Composition

Polyurethane

Nominal Thickness

~2 mm

Volatile organic compound (VOC) content

Very low content of Volatile Organic Compounds. It fulfils the stringent demands for indoor air quality and low VOC emitting products AgBB, AFFSET, A+.
Technical Information

Shore D Hardness

~60 (7 days / 23 °C / 50 % r.h.)

(DIN 53505)

Tensile Strength

~14 N/mm2 (14 days / 23 °C / 50 % r.h.)

(DIN EN ISO 527-2)

Crack Bridging Ability

~0.8 mm

(EN 1062-7)

Reaction to Fire

Bfl-s1

(EN 13501-1)

Resistance to Stubbed Cigarettes

Class 4

(EN 1399)

Chemical Resistance

Sikafloor® MultiFlex PS-32 UV always has to be sealed with Sikafloor®-305 W or Sikafloor®-304 W . Therefore, refer to the chemical resistance of the Sikafloor®-305W or Sikafloor®-304 W.

Resistance to UV Exposure

8 / Colour fastness

(EN ISO 105-B02:2002)

Skid / Slip Resistance

R10 / R11

(DIN 51130)

Application

Application Information

Applied Product Ready for Use

Temperature

Foot traffic

Light traffic

Full cure

+10 °C

~30 hours

~48 hours

~6 days

+20 °C

~16 hours

~24 hours

~4 days

+30 °C~12 hours~18 hours~3 days

Note: Times are approximate and will be affected by changing ambient and substrate conditions
Application steps

CLEANING

Please refer to the Sikafloor® Cleaning Regime

Documents