Contact us if document is not available

Show all documents

SikaWall® FL 100

(former MProtect FL 100)

READY MIXED JOINT FILLER FOR INTERNAL AND EXTERNAL SURFACES

SikaWall® FL 100 is a ready to use filler for use on all common building surfaces. It gives a high quality, even surface for painting.

  • Tough durable filler
  • Weather resistant
  • Alkali resistant
  • Easy to apply
  • Quick drying
  • High crack resistance
  • Excellent adhesion
Inquire Now

Contact us if document is not available

Show all documents

Usage

  • SikaWall® FL 100 is specifically manufactured for professional repair and touch-up of exterior and interior surfaces, both new and old, prior to painting. It is designed for filling joints, hairline cracks etc. by hand application. Unlike conventional fillers, SikaWall® FL 100 has elastic properties, does not flake off, is permanent and retains its adhesion.
  • SikaWall® FL 100 is suitable for exterior as well as interior surfaces. When dry, SikaWall® FL 100 is weather resistant and bonds extremely well to cement and gypsum based plasters and gypsum boards.
  • It is used as a thin coat filler for patching hairline cracks in walls, ceilings, soffits, repair to damaged plasterwork, paintwork and exposed concrete.
 

Advantages

  • Tough durable filler
  • Weather resistant
  • Alkali resistant
  • Easy to apply
  • Quick drying
  • High crack resistance
  • Excellent adhesion

Packaging

25 kg units

Colour

White

Product Details

Product Information

Composition

BindersFillers
Styrene acrylateFine precisely graded fillers

Shelf life

12 months from production date

Storage conditions

Store in undamaged, unopened, original sealed packaging in dry conditions at temperatures between +5°C and +25°C. Protect from direct sunlight, heat and moisture.

Density

~1.70 kg/l (at 25°C)

 

Application

Application Information

Layer thickness

Max. 1 mm per coat
Consumption

Consumption

Apply the filler in a thin even layer between 0.5 - 1.5 kg/m²

 

 

These figures are theoretical and do not include for any additional material required due to surface porosity, surface profile, variations in level and wastage, etc.
Application steps

SUBSTRATE PREPARATION

  • Ensure that the surface is free from dust, dirt, form oil and contamination.
  • Ridges and undulations must also be removed.
  • When applying filler to old painted surfaces first wash down with soda / water solution, rinse and allow to dry before filling.
  • The use of penetrating primer is recommended on dusting or flaking surfaces, for further information contact Sika Technical Services.
 

MIXING

SikaWall® FL 100 is supplied ready for use and should not be thinned. For optimal performance stir mechanically with a slow speed drill (maximum, 500 rpm) for at least 3 minutes and until a smooth, even consistency is achieved.

APPLICATION

  • Apply the filler in a thin, even layer.
  • If the area under repair requires a thick coat, apply several thin layers, allowing each layer to dry before adding the next.
  • Lightly sandpaper over the dry final surface before painting, preferably within 9 hours of application.

CLEANING OF EQUIPMENT

Clean equipment and mixer immediately after application with water. Hardened material can only be removed mechanically.

Documents