SikaBond®-114 Grip Tight
Interior and Exterior Grab Adhesive
SikaBond®-114 Grip Tight is a 1-part, rubber-resin-based construction adhesive with high final strength which bonds to most construction material substrates. Suitable for use in hot and tropical climatic conditions.
- Easy to apply
- Rapid initial grab
- Rapid strength gain
- Wide adhesion range
Usage
Bonding of various construction components:- Skirting boards
- Wooden frames
- Battens
- Panels
- Mouldings
- Hard PVC profiles
- Sheet boards
- Metal protection angles
- Concrete, mortar, fibre cement, wood and paint
- Other various porous and non-porous construction materials.
Advantages
- Easy to apply
- Rapid initial grab
- Rapid strength gain
- Wide adhesion range
Packaging
290 mL cartridge, 12 cartridges per box
Colour
Beige
Product Details
SUSTAINABILITY
SikaBond®-114 Grip Tight is certified according "Low Emitting Materials (Paints, Coatings, Adhesives and Sealants) as per the 2010 Dubai Green Building Regulations and Specifications" by Dubai Central Laboratory (DCL) certificate No. CL18020589.
Composition
Rubber resin based
Shelf life
12 months from the date of production
Storage conditions
The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +25 °C. Always refer to packaging.
Density
| ~1.25 kg/L | (ISO 1183-1) |
Shore A Hardness
| ~64 (after 28 d) | (ISO 868) |
Shear Strength
| ~2.5 N/mm2 (0.1 mm adhesive thickness) | (EN 1465) |
Service Temperature
−20 °C min. / +50 °C max.
Application
Sag Flow
| 0 mm (20 mm profile, 23 °C) | (ISO 7390) |
Ambient Air Temperature
+5 °C min. / +40 °C max.
Substrate Temperature
+5 °C min. / +40 °C max. (min. 3 °C above dew point temperature)
Open Time
| ~1–5 min (23 °C / 50 % r.h.) |
Yield
1 Cartridge (290 mL)
| Yield | Dimension |
| ~100 spots | Diameter = 30 mm Thickness = 4 mm |
| ~15 m bead | Nozzle diameter = 5 mm (~20 mL per linear meter) |
APPLICATION INSTRUCTIONS
SUBSTRATE PREPARATION
The substrate must be sound, clean, dry and free of all contaminants such as dirt, oil, grease, cement laitance, old sealants and poorly bonded paint coatings which could affect adhesion.
Removal techniques such as wire brushing, grinding, sanding or other suitable mechanical tools can be used.
All dust, loose and friable material must be completely removed from all surfaces before application of adhesive.
For critical, high performance applications, contact our Technical Department for more information.
CLEANING OF EQUIPMENT
Clean all tools and application equipment immediately after use with Sika® Remover-208. Once cured, hardened material can only be removed mechanically.
For cleaning skin use Sika® Cleaning Wipes-100.