Wabo® CLM ColGard
Wabo® CLM ColGard is a rubber corner guard designed for impact protection.
- Protect edges of walls and columns
- High impact resistance moulded rubber
- Excellent weather resistance
- Crack resistant
- Do not stain vehicles
- Easy installation
- Eco Friendly
Usage
Designed to protect column corners from impact damage in parking structures, loading docks etc.Advantages
- Protect edges of walls and columns
- High impact resistance moulded rubber
- Excellent weather resistance
- Crack resistant
- Do not stain vehicles
- Easy installation
- Eco Friendly
Packaging
Supplied in standard 1-meter length.
Custom lengths are available upon request.
Colour
Available with or without yellow strips
Product Details
Composition
Natural Rubber/ Styrene-Butadiene Rubber (NR/SBR)
Ethylene Propylene Diene Monomer (EPDM)
Shelf life
24 months if stored in a cool, dry environment, protected from direct sunlight, UV radiation, ozone, and excessive humidity.
Storage conditions
The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +25 °C.
Dimensions
| Fixed by Screws (wings sizes with clips) | Fixed by Adhesives (wings sizes without clips) |
| 50 x 50 mm | 75 x 75 mm |
| 65 x 65 mm | 100 x 100 mm |
| 75 x 75 mm | |
| 90 x 90 mm | |
| 100 x 100 mm | |
| 120 x 120 mm | |
| 150 x 150 mm |
Cross section
| Fixed by Screws | Fixed by Adhesive |
Shore A hardness
| NR/SBR | ~75 |
| EPDM | ~70 |
Tensile strength
| NR/SBR | 12 N/mm2 |
| EPDM | 10 N/mm2 |
Resistance to tear
| NR/SBR | ≥ 30 kN/m |
| EPDM | ≥ 30 kN/m |
Retention of properties after heat ageing
NR/SBR
| Shore A Hardness | +5 |
| Tensile Strength | -25 % |
| Elongation at Break | -22 % |
EPDM
| Shore A Hardness | +10 |
| Tensile Strength | -25 % |
| Elongation at Break | -35 % |
Ageing resistance 70h at 100 °C
Water resistance
| NR/SBR | Good |
| EPDM | Excellent |
Flexibility at low temperature
| NR/SBR | Good |
| EPDM | Good |
Elongation at break
| NR/SBR | ≥ 325 % |
| EPDM | ≥ 200 % |
Application
APPLICATION
Corner Guards are mounted on Galvanized Iron (GI) clip inserts and bolted into columns or walls by screws.
Alternatively, they can be fixed to the column or corner surface using suitable adhesives.