Wabo® D Guard
Wabo® D Guard is a rubber fender designed for impact protection.
- High impact resistance moulded rubber
- Excellent weather resistance
- Excellent abrasion resistance
- Crack resistant
- Easy installation
Usage
Wabo® D Guard is typically used in loading bays and docks to absorb vehicle impact and prevent structural damage.Advantages
- High impact resistance moulded rubber
- Excellent weather resistance
- Excellent abrasion resistance
- Crack resistant
- Easy installation
Packaging
Supplied in standard 3-meter profile length
Custom lengths are available upon request
Colour
Product Details
Composition
Natural Rubber/ Styrene-Butadiene Rubber (NR/SBR)
Shelf life
24 months from date of production if stored in a cool,
dry environment, protected from direct sunlight, UV radiation,
ozone, and excessive humidity.
Storage conditions
The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +25 °C.
Dimensions
Standard Sizes:
| Type | Width (mm) | Height (mm) |
| D1 | 75 | 45 |
| D2 | 150 | 150 |
| D3 | 200 | 200 |
| P1 | 150 | 75 |
| P2 | 300 | 300 |
| C1 | 150 | 75 |
Shore A hardness
| ~75 | (ASTM D2240) |
Tensile strength
| 12 N/mm2 | (ASTM D412) |
Resistance to tear
| ≥ 30 kN/m | (ASTM D624) |
Retention of properties after heat ageing
| Shore A Hardness | +5 |
| Tensile Strength | -25 % |
| Elongation at Break | -22 % |
Ageing resistance 70h at 100 °C
Water resistance
Good
Flexibility at low temperature
| Good | (ASTM D746) |
Elongation at break
| ≥ 325 % | (ASTM D412) |
Application
APPLICATION
Rubber Fenders can be fixed horizontally to a wall or mounted in short vertical strips on flat or curved surface areas.