Contact us if document is not available

Show all documents

SikaInject®-107 DE

(former TPH.® PUR-O-STOP FLEX)

Polyurethane based 1-component injection resin for permanent waterproofing.

SikaInject® 107 DE is a flexible PU-based single component injection resin for permanent ductile waterproofing according to EN 1504-5.

  • Reacts with the water present in the injection area with strong foam formation.
  • Resulting foam is closed-celled, highly flexible and extremely tear resistant.
  • Permanently elastic; can absorb limited movement.
  • Can be injected by 1-C-pumps (pneumatic, electic, manual).
Inquire Now

Contact us if document is not available

Show all documents

Usage

  • Stopping of flowing water,  filling of cracks, joints & honeycombs.
  • Injection into masonry, concrete structures, civil engineering construction and tunneling.
 

Advantages

  • Reacts with the water present in the injection area with strong foam formation.
  • Resulting foam is closed-celled, highly flexible and extremely tear resistant.
  • Permanently elastic; can absorb limited movement.
  • Can be injected by 1-C-pumps (pneumatic, electic, manual).

Packaging

21 kg or 10 kg

Refer to current price list for packaging variations.

Colour

transparent reddish

Product Details

Sustainability / Certifications / Approvals

CERTIFICATES AND TEST REPORTS

Concrete injection for ductile filling of cracks, voids and interstices (D) according to EN 1504-5:2004.

Declaration of performance GER0513/04, CE-marking.

Testing of eluates acc. to drinking water (V-202304-4) 
Product Information

Shelf life

12 months from date of production

Storage conditions

The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperature between +15 °C and +25 °C.

Density

~1.1 kg/l (23° C, ISO 2811-1)

Viscosity

~300 mPas (23°C, ISO 2555)

Consistency

Water-reactive polyurethane resin, liquid

 

Application

Application Information

Reaction time

SikaInject-107
Expansion Start~20 sASTM D7487
Expansion End~120 sASTM D7487
Free Foaming Factor~30xASTM C1643
Foam Density~38 kg/m3DIN EN 845
Values with 5% water at 23° C
Application steps

NOTES ON INSTALLATION

For application in dry areas pre-inject with clean water (seperate pumping equipment)

SUBSTRATE PREPARATION

Surfaces of cracks, joints and voids need to be clean, free of loose particles, dust, oil and any other bond-breaking substances.

Any dirt must be blown out with compressed air.

APPLICATION

Reference must be made to further documentation where applicable, such as relevant method statement, application manual and installation or working instructions.

CLEANING OF EQUIPMENT

Use SikaInject® Cleaner C1 or SikaInject® CL2 for pump-cleaning (non-cured resin). Cured material can only be removed mechanically.

 

Documents