Sikaplan® WP Control Injection System
Sikaplan® WP Control Injection System consists of injection sockets on base of PVC-p plus injection hose and its connection pieces to be mounted after membrane installation and prior to concreting works. Suitable for use in hot and tropical climatic conditions.
- High pressure resistance
- Easy and quick control of watertightness
- All components are compatible with each other
- Sockets are compatible with all homogeneous PVC membranes by heat welding
- Tested compatibility with Sika® Injection -306, -307 and -701
System Structure
Usage
Sikaplan® WP Control Injection System as a control- and injection system to control the watertightness of a completed basement or tunnel waterproofing system with PVC sheet membranes and waterbars to form compartments. The system is suitable for the use as injection access to waterproof leaks in installed membrane systems at any time after structural works have been completed.Advantages
- High pressure resistance
- Easy and quick control of watertightness
- All components are compatible with each other
- Sockets are compatible with all homogeneous PVC membranes by heat welding
- Tested compatibility with Sika® Injection -306, -307 and -701
Packaging
Please consult individual product descriptions.
System Details
System Structure
Sockets
Sikaplan® WP Control Socket 6 (Article No. 85118) with integrated connector for the injection hose. Fixing of 5-6 pieces into each compartment field.
Hose
Sikaplan® W Control Tube (Article No. 110975), made of PU, resistant to Sika® injection materials and injection pressure up to 7 bar.
Extension
Sikaplan® W Connection Piece (Article No. 110890). To extend injection hoses. Pressure resistant up to 7 bar.
|
|
|
Alternative plug-in connectors are available upon request.
Closing options at termination box
Option 1: For injection hoses under very high pressure: SPL W Lock Cap 6mm (Art. 111995, black) in combination with Sikaplan® W Connection Piece (Article No. 110890):
|
|
|
Option 2: For injection hoses under pressure: SPL W Lock Connection Cap 6mm (Art. 111994):
|
|
|
Option 3: Closure plugs – Type 1 (Art. 176452). To close hose ends during construction works to avoid dust and dirt from entering. Not pressure resistant:
|
|
|
Connection to injection pump
Sikaplan® W Injection piece. Art. 460044. To connect the injection hose with the injection pump and to close injected hoses under pressure. Resists injection pressure of up to 7 bar.
Shelf life
5 years shelf life from date of production if stored properly in undamaged, unopened, original sealed packaging.Storage conditions
The products must be stored in their original package, under cool and dry conditions. They must be protected from direct sunlight, rain, snow and ice, etc.
Ambient Maximum Temperature of Liquids
| + 35 °C max. |